Ridetech HQ Coil-Over Suspension | 55-57 Chevy
$5,400.00
- HQ-Series Monotube Coil-overs
- Tubular A-Arms and 4-Link
- Bolt-on Design with Minimal Welding
- Heavy Duty Front Sway Bar
- Improved Handling and Ride Quality
Description
Upgrade your 1955-1957 Chevy with a Ridetech HQ Coil-Over Suspension System. Includes front and rear coilovers, upper and lower tubular A-arms, tall spindles, parallel 4-Link rear suspension, and a heavy-duty front sway bar. Compared to stock leaf springs, the 4-link and excellent monotube coil-overs will completely transform the ride quality of your Tri-Five Chevy. It will also dramatically improve handling and traction. The rear suspension links feature Ridetech R-Joints which are noise free and have an extended service life compared to typical rod-ends. Up front, the tubular suspension modernizes your car’s suspension geometry for modern caster and camber characteristics. The result is improved handling and feedback at the steering wheel. Springs are sized for a mix of comfort and handling with a typical small block or LS.
With coil-overs, it’s super easy to swap springs for more aggressive handling and/or heavier vehicle specs such as a big block or supercharger. Coil-overs also make it easy to fine tune ride height. Simply adjust the threaded collars at each corner. Ridetech HQ series coil-overs feature rebound adjustment that helps you fine tune ride quality to your cars specs, your area’s road conditions and your preferences. Monotube shock valving is far superior to typical twin tube shocks offered by most competitors. The difference between monotube and twin tube is night and day. Best of all, Ridetech coil-overs carry a 1,000,001 mile warranty.
Ridetech’s excellent sway bar features noise free end links and bushings with really slick mounts. The sway bar adds spring rate only when cornering.
All suspension arms — front and rear are designed to bolt to stock chassis mounting points where possible for easy installation. The rear suspension cradle can be bolted or welded to the rear frame rails. Axle mounts must be welded. Kilgore Kustoms can handle all welding and install the entire kit as needed.
***Specify if your car has a 1-piece frame or 2-piece frame
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Frame Type | 1-Piece Frame 33-11/16" wide, 2-Piece Frame 35-1/8" wide |

















Reviews
There are no reviews yet.